Bluetti Hub A1

BLUETTI Hub A1 for Apex 300

Cables sold separately

The BLUETTI Hub A1 allows you to connect up to three Apex 300 power stations in parallel to create a significantly more powerful energy system. With up to 11.5 kW of power, it transforms multiple Apex 300 units into a modular electrical system for an RV, cottage, base camp, or off-grid installation. Its plug-and-play design also simplifies charging and managing multiple units within a single system.

• Model: A-PAB-HUBA1-0370.
• Power: Up to 11.5 kW with three Apex 300 units.
• Outputs: NEMA L14-30R 30 A and NEMA 14-50R 50 A.
• Parallel port: P050A, 120 V / 240 V, up to 50 A.
• Input: Up to 6 kW at 120 V or 12 kW at 240 V.
• Dimensions: 454 × 250 × 76 mm, weighing only 3.5 kg.
• Operating temperature: -20 °C to 40 °C.
• Noise level: Up to 40 dB.

This configuration goes far beyond the capabilities of a traditional portable power station. For example, the NEMA 14-50R 50 A output is well suited for installations with higher energy demands, including certain RVs and mobile workshops. In addition, bypass mode allows available shore power to pass directly through the system.

Up to 11.5 kW with Three BLUETTI Apex 300 Units

The main advantage of the Hub A1 is its ability to combine up to three BLUETTI Apex 300 power stations. You can start with a simpler configuration and gradually increase the power of your system as your needs evolve.

With three Apex 300 units connected in parallel, the system can deliver up to 11.5 kW of power. This architecture is particularly useful for running multiple high-demand appliances simultaneously, including air conditioning, water pumps, appliances, and certain power tools.

BLUETTI Hub A1 Compatibility

The Hub A1 is specifically designed to work with the BLUETTI Apex 300 power station. The units connect to the system through the P050A ports to create a parallel configuration capable of operating at 120 V or 240 V.

The Hub A1 also integrates into the ecosystem of BLUETTI power stations and expansion batteries. For recreational vehicle installations, you can also explore our RV solar kit.

The result is an expandable energy system that can be adapted to your power, capacity, and off-grid autonomy requirements.

A 120 V / 240 V Solution for RVs, Cottages, and Off-Grid Systems

With NEMA L14-30R 30 A and NEMA 14-50R 50 A outputs, the Hub A1 allows Apex 300 power stations to be used in installations requiring more power than a traditional portable setup.

This makes it particularly useful for an RV, off-grid cottage, base camp, or mobile workshop. Depending on your configuration, you can power equipment such as air conditioning, a water pump, refrigerator, kitchen appliances, or various tools.

When an external power source is available, bypass mode also allows shore power to pass directly through the system. This allows the Apex 300 units to become part of a much more complete energy system.

Camping, RV, and Overlanding Applications

For trips lasting a few days, a single Apex 300 can already cover many energy needs. The Hub A1 then allows you to expand the system when additional power becomes necessary.

For extended road trips, adding a second or third Apex 300 significantly increases the capabilities of the system. This allows you to power more equipment simultaneously while maintaining a modular architecture.

For a cottage or off-grid installation used for several months at a time, three Apex 300 units connected to the Hub A1 can provide up to 11.5 kW. This gives you a quiet power solution for multiple appliances without constantly relying on a gas generator.

Practical Tips for the BLUETTI Hub A1

Install the Hub A1 close to the Apex 300 units in a dry, protected, and properly ventilated location. Only use the appropriate P050A cables designed to connect the units in parallel.

Before connecting or disconnecting any system connections, make sure the relevant equipment is powered off. Once the system is configured, monitor power consumption and state of charge directly from your Apex 300 units.

If your installation also requires 12 V DC distribution, add a BLUETTI Hub D1 designed for this purpose.

Finally, if your energy needs are simpler and you are primarily looking for a standalone portable power station, compare the BLUETTI Premium AC200PL. This will help you choose an architecture suited to your power requirements, desired autonomy, and type of installation.